Rockwell Automation 1769-OF2 Compact I/O Analog Modules - Manual (Page 163)

Publication 1769-UM002B-EN-P - July 2005
Configuring Modules in a Remote DeviceNet System with a 1769-ADN DeviceNet Adapter D-3
4. To configure I/O for the adapter, double-click the adapter icon that
appears on the network.
5. Click the Module Configuration tab.
TIP
The I/O Summary tab provides the configured sized and
format of the I/O data.
The Transaction tab lets you send services supported by
the device. The Clear/Reset Memory transaction returns
the module’s configuration to the factory defaults, that is,
empty. This operation cannot be undone.