Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 162)

7
Changing Processor Modes
SLC 5/03 and 5/04 processors have a keyswitch that can be set to either RUN,
PROGram, or REMote. Remote modes include program, run, and test. Other SLC and
MicroLogix processors have no keyswitch. All modes are considered remote in these
processors because the programming device rather than the keyswitch must supply the
command to change modes. The following table indicates the modes available for
various processors.
Mode
Processor Run Program RemProg RemRun RemTest
MicroLogix • • •
*
Fixed • • •
*
SLC 5/01 • • •
*
SLC 5/02 • • •
SLC 5/03 • • • • •
SLC 5/04 • • • • •
•
* Single Scan and Continuous Scan test modes only.