Rockwell Automation 5370 Color CVIM Communications Manual - Manual (Page 194)

Appendix C
Numerical Results Data
C–15
The sixth results block can be configured via either the RS–232 or Remote
I/O. There are up to three configurations for this block. There is a unique
configuration for each RS–232 port. The Remote I/O channel configures the
block used for Remote I/O and backplane. See Table C.6.
Table C.6
Results Block #6
Word #
PI
Backplane
RS–232
and
Remote I/O
Bit # Function Notes
352 0 0–15 Block Transfer Signature
353 1 10–15 Status
The contents of
this word will be 0 if
all of the requested
data fits in the 64
word results block.
Otherwise, the
contents will be
non–0.
354–413 2–61 0–15
User Defined Inspection
Results Data
414–415 62–63 0–15 Task Triggers (32 Bits)
Each type of result requires a specific number of words. Use the following as
a guideline when setting up a programmable block transfer:
NUMBER OF WORDS FORMAT
Module Status 1 Word
X/Y Reference Line 2 Words 16 Bit Integer
Window 2 Words
(Object & Pixel)
32 Bit Integer
(Luminance) 16 Point 16
(Color Match) 32 Bit Integer
(Color ID) 32 Bit Integer
(Gradient) 32 Bit Integer
Brightness Probe 6 Words 16 Point 16
Reference Window 14 Words 16 Bit Integer
and
16 Point 16
Gage 2 Words
(Linear Measure)
16 Point 16
(Edge, Pixel, Object) 32 Bit Integer
X, Y Position 16 Point 16
Results Block #6