Metrohm NIRS XDS Process Analyzer – DirectLight/NonContact - Manual (Page 54)

52 ▪▪▪▪▪▪▪
7. This screen sets up communication
parameters for the instrument. The XDS
instrument has a unique driver. Highlight
this box and click on “Configure”.
8. This box allows the user to select the instrument identified by the instrument serial number.
The number in front of the instrument S/N is the IP (Internet Protocol) address assigned to
the XDS instrument.
Use the drop-down arrow of the IP Address box, and select the correct instrument. The
instrument must show “Available” to be selected.
9. Highlight the instrument, then Click “OK” to exit the dialog box.
10. If the data to be acquired will be used on
other similar instruments, it is advisable to
enter Configure, Options from the menu
bar.
This should be done before setting up a
Data Collection Method (DCM).