La Cornue Rotisserie Centenaire - Manual (Page 4)

Proper Installation - Be sure your appliance is properly installed
and grounded by a qualified technician.
The installation of your La Cornue appliance must conform with
local codes or, in the absence of local codes, in the USA with the
"National Fuel Gas Code", ANSI Z223.1NFPA 54, latest edition, and,
in Canada, with CAN/CGA - B149.1, and CAN CGA - B149.2,
“Installation Code for Gas Burning Appliances”.
The appliance must be electrically installed and grounded in
accordance with local codes or in the absence of such codes with
the latest edition of the “National Electrical Code”, ANSI/NFPA 70
in the USA, and CSA C22.2 “Canadian Electrical Code” - in Canada.
Important - Save the installation instructions for the local
electrical inspector’s use.
This appliance is designed for domestic cooking only. Use for any
other purpose could invalidate any warranty or liability claim.
The appliance and its individual shutoff valve must be disconnected from
the gas supply piping system during any pressure testing of that system at
test pressures in excess of 1/2 psig (3.5 kPa).
The appliance must be isolated from the gas supply piping system by closing
its individual manual shutoff valve during any pressure testing of the gas
supply piping system at test pressures equal to or less than 1/2 psig
(3.5 kPa).
The inlet gas supply pressure to the appliance must be within the following
limits
L LA A C CO OR RN NU UE E IIn ns stta alllla attiio on n g gu uiid de e B Brro oc ch he e F Flla am mb be errg ge e Page 3 3
Read all instructions before using this appliance. Save these instructions for future reference.
I
M P O R TA N T
S
A F E T Y
I
N S T R U C T I O N S