Great Plains YP4025F-1670 Operator Manual - Manual (Page 59)

Great Plains Manufacturing, Inc. Table of Contents Index Operating Instructions 55
2014-09-08 Table of Contents Index 401-571M
Short-Term Parking
1. Fold markers. See “Folding the Markers” on
page 41.
2. Choose a location with level firm ground. Do not
unhitch on a slope.
3. Raise the planter.See “Raising Planter” on page 30.
4. Fold the planter (optional). See “Folding the YP40
Planter” on page 32.
5. Block tires.
6. Re-install the parking stand (“Hitching Tractor to
Planter” on page 17).
Refer to Figure 58 (shown without tractor for clarity)
7. For the standard 3-point hitch, deploy the two
forward stands
. Remove the inner pin , swing
the stand out, down and vertical around the
bottom pin , and re-insert the pin at .
For hydraulic hitch planters, adjust hitch cylinder to
relieve weight from draw-bar.
8. Insert transport locks on all lift cylinders.
9. Disconnect hydraulic lines. Secure them so that they
do not touch the ground.
10. Disconnect electrical cables, capping where
provisioned.
Figure 58
Deploying 3-Point Stands
26034
7
4
6
5
5
5 4
5
6 7