Dell POWEREDGE M1000E - Manual (Page 155)

Dell Converged Enhanced Ethernet Command Reference 139
53-1002115-01
fcoe-vlan
9
fcoe-vlan
Configures an FCoE VLAN to the FCoE map and deletes the previous FCoE VLAN.
Synopsis fcoe-vlan vlan_id
Operands vlan_id Specifies the VLAN interface to configure. The range of valid values is from 2
to 3583.
Defaults There are no default configurations for this command.
Command
Modes
Feature configuration mode
Description Use this command to configure an FCoE VLAN to the FCoE map. Using this command deletes the
previous FCoE VLAN.
Usage
Guidelines
There are no usage guidelines for this command.
Example You must first enter FCoE map mode, then configure the VLAN.
switch(config)#fcoe-map default
switch(conf-fcoe-map)#fcoe-vlan 5
See Also fcoe-map, fcoeport