Dell POWEREDGE M1000E - Manual (Page 228)

212 Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
ip igmp static-group
12
ip igmp static-group
Configures the static group membership entries.
Synopsis ip igmp static-group A.B.C.D {interface [{in | ex}tengigabitethernet slot/port] interface port-channel
number}
no ip igmp static-group A.B.C.D {interface [{in | ex}tengigabitethernet slot/port] interface
port-channel number}
Operands A.B.C.D Specifies the group address, as a subnet number in dotted decimal format
(for example, 10.0.0.1), as the allowable range of addresses included in the
multicast group.
interface Use this keyword to specify any of the following interfaces:
extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
port-channel number
Specifies the interface is a port-channel. The range of valid values is 1-63.
Description Using ip igmp static-group, packets to the group are fast-switched out of the interface, providing
that the packets were received on the correct reverse path forwarding (RPF) interface. Static group
membership entries are automatically added to the IGMP cache and mroute table.
Defaults There are no defaults for this command.
Command
Modes
Privileged EXEC Mode
User Guidelines There are no user guidelines for this command.
Example none
See Also none