Dynojet 250iPX: Installation Guide - Manual (Page 23)

In Ground Model 200iPX/250iPX Motorcycle Dynamometer Installation Guide
2-1
C
H A P T E R
2
I
NSTALLATION
This chapter will walk you through unpacking and installing the dynamometer. To
ensure safety and accuracy in the procedures, perform the procedures as they are
described.
This chapter is divided into the following categories:
• Dyno Drum Module Installation, page 2-2
• Eddy Current Brake Installation, page 2-9
• iPX Drum Module Installation, page 2-12
• Secure the Drum and Brake Module to the Pit Floor, page 2-17
• Pickup Card, page 2-18
• Left Side Blower Mount and Monitor Arm Installation, page 2-19
• Trike Carriage Adapter Installation, page 2-24
• Routing Cables, page 2-29
• Carriage Assembly and Power Carriage Installation, page 2-45
• Final Adjustments and Tests, page 2-48
• Pit Cover Installation, page 2-50
• Junction Box Cover, Cable Cover, and End Cap, page 2-58
• Zip Tube, page 2-59
• Ground Hook Installation, page 2-60