KEYENCE LK-G5000 Series - Manual (Page 17)

17
If the data storage function is used, it will be possible to save up to 1.2 million points of LK-G measurement data to the controller.
If the LK-Navigator 2 is used, this measurement data can be checked on a PC and saved as a CSV file as well.
Data storage function setting methods
Overview
Up to 1.2 million individual measurement values for OUT1 through OUT12 can be accumulated to the internal memory for each
external timing input or set storage cycle.
The data storage interval can be controlled via the LK-Navigator 2 software (LK-H2) or from RS-232C commands.
When stored data is loaded in LK-Navigator 2, the waveform display or cursor can be used to display recorded values such as
maximum and minimum measurements. Also, stored data can be saved in CSV format, allowing the data to be loaded into Excel
or other data analysis systems.