8 vlan setting example, 1 two separate 802.1q vlans – Interlogix NS3702-24P-4S User Manual User Manual
Page 128
![background image](/manuals/679211/128/background.png)
128
4.6.8 VLAN setting example:
Separate VLAN
802.1Q VLAN Trunk
Port Isolate
4.6.8.1 Two Separate 802.1Q VLANs
The diagram shows how the Managed Switch handle Tagged and Untagged traffic flow for two VLANs. VLAN Group 2 and VLAN
Group 3 are separated VLAN. Each VLAN isolate network traffic so only members of the VLAN receive traffic from the same VLAN
members. The screen in
Figure 4-6-8
appears and
Table 4-6-9
describes the port configuration of the Managed Switches.
Figure 4-6-8:
Two Separate VLANs Diagram
VLAN Group
VID
Untagged Members
Tagged Members
VLAN Group 1
1
Port-7 ~ Port-28
N/A
VLAN Group 2
2
Port-1,Port-2
Port-3
VLAN Group 3
3
Port-4,Port-5
Port-6
Table 4-1:
VLAN and Port Configuration
The scenario is described as follows: