Interlogix NS3702-24P-4S User Manual - Manual (Page 18)

18
1.5 Product Specifications
Product NS3702-24P-4S
Hardware Specifications
SFP/mini-GBIC Slots
4 100/1000Base-X SFP interfaces, shared with Port-21 to Port-24
Compatible with 100Base-FX SFP transceiver
Console 1 x RS-232 DB9 serial port (115200, 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 48Gbps / non-blocking
Throughput 35.7Mpps@64Bytes
Address Table 16K entries, automatic source address learning and ageing
Share Data Buffer 4M bits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 9K bytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory Default
Dimension (W x D x H) 440 x 300 x 44.5 mm, 1U height
Weight 4750g
LED
System:
Power ( Green )
FAN1 ( Green ), FAN2 ( Green ), FAN3 ( Green ), PWR ( Green )
10/100/1000T RJ45 Interfaces (Port 1 to Port 24):
10/100/1000Mbps LNK/ACT ( Green )
PoE In-Use ( Orange )
100/1000Mbps SFP Combo Interfaces (Port 21 to Port 24):
1000Mbps ( Green ), LNK/ACT ( Orange )
Power Requirement 100~240V AC, 50/60Hz, 6A
Power Consumption 422 watts / 1447 BTU Max.
ESD Protection
6KV DC
Power over Ethernet
PoE Standard IEEE 802.3af / 802.3at PoE / PSE
PoE Power Supply Type End-span
PoE Power Output Per Port 56V DC, Max. 30.8 watts
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 440 watts Max.
PoE Ability PD @ 7 watts 24 units