8 lldp poe neighbours – Interlogix NS3702-24P-4S User Manual User Manual

Page 359

Advertising
background image

359

Object

Description

Profile

Set the schedule profile mode. Possible profiles are:

Profile1

Profile2

Profile3

Profile4

Week Day

Allows user to set week day for defining PoE function should be enabled on the day.

Start Hour

Allows user to set what hour does PoE function enables.

Start Min

Allows user to set what minute does PoE function enables.

End Hour

Allows user to set what hour does PoE function disables.

End Min

Allows user to set what minute does PoE function disables.

Reboot Enable

Allows user to enable or disable whole PoE port reboot by PoE reboot schedule.

Please be noticed that if you want to PoE schedule and PoE reboot schedule work

at the same time, please use this function, and don’t use Reboot Only function.

This function offers administrator to reboot PoE device at indicate time if

administrator has this kind of requirement.

Reboot Only

Allows user to reboot PoE function by PoE reboot schedule. Please be noticed that if

administrator enable this function, PoE schedule will not to set time to profile. This

function just ony for PoE port reset on the indicate time.

Reboot Hour

Allows user to set what hour PoE reboots. This function only for PoE reboot

schedule.

Reboot Min

Allows user to set what minute PoE reboots. This function only for PoE reboot

schedule.

Buttons

: click to add new rule.

: Click to apply changes

: Check to delete the entry.

4.16.8 LLDP PoE Neighbours

This page provides a status overview for all LLDP PoE neighbors. The displayed table contains a row for each port on which an

LLDP PoE neighbor is detected. The columns hold the following information: The screen in Figure

4-16-7

appears.

Advertising