Cisco VPN 3002 - Manual (Page 106)

9-10
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 9 Events
Configuration | System | Events | Classes | Add or Modify
Configuration | System | Events | Classes | Add or Modify
These screens let you:
Add: Configure and add the special handling of a specific event class.
Modify: Modify the special handling of a specific event class.
Figure 9-4 Configuration | System | Events | Classes | Add Screen
Class Name
Add screen:
Click the drop-down menu button and select the event class you want to add and configure for
special handling. (Please note that Select Class is an instruction reminder, not a class.)
Table 9-1
describes the event classes.
Modify screen:
The field shows the configured event class you are modifying. You cannot change this field.
All subsequent parameters on this screen apply to this event class only.
Enable
Check this box to enable the special handling of this event class. (The box is checked by default.)
Clearing this box lets you set up the parameters for the event class but activate it later, or temporarily
disable special handling without deleting the entry. The Configured Event Classes list on the
Configuration | System | Events | Classes screen indicates disabled event classes. Disabled event classes
are handled according to the default parameters for all event classes.
Severity to Log
Click the drop-down menu button and select the range of event severity levels to enter in the event log.
The choices are: None, 1, 1-2, 1-3,..., 1-13. The default is 1-5; if you choose this range, events of severity
level 1 through severity level 5 are entered in the event log.