Cisco VPN 3002 - Manual (Page 216)

13-28
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 13 Monitoring
Monitoring | Statistics | SSL
Timeouts
The number of DNS queries that failed because there was no response from the server.
Server Unreachable
The number of DNS queries that failed because, according to the VPN 3002 routing table, the address
of the server is not reachable.
Other Failures
The number of DNS queries that failed for an unspecified reason.
Monitoring | Statistics | SSL
This screen shows statistics for SSL (Secure Sockets Layer) protocol traffic on the VPN 3002 since it
was last booted or reset.
To configure SSL, see Configuration | System | Management Protocols | SSL.
Figure 13-13 Monitoring | Statistics | SSL Screen
Reset
To reset, or start anew, the screen contents, click Reset. The system temporarily resets a counter for the
chosen statistics without affecting the operation of the device. You can then view statistical information
without affecting the actual current values of the counters or other management sessions. The function
is like that of a vehicle’s trip odometer, versus the regular odometer.
Restore
To restore the screen contents to their actual statistical values, click Restore. This icon displays only if you
previously clicked the Reset icon.