Cisco VPN 3002 - Manual (Page 54)

3-8
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 3 Interfaces
Configuration | Interfaces | Public
Duplex
If you are using static IP addressing, click the drop-down menu button and select the interface
transmission mode:
• Auto = Let the VPN 3002 automatically detect and set the appropriate transmission mode, either
full or half duplex (default). Be sure that the port on the active network device (hub, switch, router,
etc.) to which you connect this interface is also set to automatically negotiate the transmission mode.
Otherwise, select the appropriate fixed mode.
• Full-Duplex = Fix the transmission mode as full duplex: transmits and receives at the same time.
• Half-Duplex = Fix the transmission mode as half duplex: transmits or receives, but not at the same
time.
Apply / Cancel
To apply your settings to this interface and include your settings in the active configuration, click Apply.
The Manager returns to the Configuration | Interfaces screen.
Reminder:
To save the active configuration and make it the boot configuration, click the Save Needed icon at the
top of the Manager window.
To discard your settings, click Cancel. The Manager returns to the Configuration | Interfaces screen.