Corinex Global ADSL2+ - Manual (Page 18)

17
Installation Overview
Corinex ADSL2+ Wireless Gateway G
6. Click OK again to close.
7. Make sure that the ADSL2+ Wireless Gateway G is powered on. Restart your
system.
8. Follow the above steps 1-7 for all computers connected to the gateway through
the
Ethernet interface.
3.2.2 Installing the USB Device Driver
Note: Please do not connect the Corinex ADSL2+ Wireless Gateway G to your
computer before step #2.
1. Insert the Corinex ADSL2+ Wireless Gateway G CD into the CD-ROM drive of
your computer. If the installation wizard doesn’t start automatically, please
navigate to the main folder of the installation CD (with Windows Explorer or
any other file browser program) and run the program named autorun.exe.
Click Install USB Drivers. The wizard for the USB driver installation will start.
Please wait until the installation of the drivers is finished and then click Close to
finish the installation wizard.
Click Install USB Drivers. The wizard for the USB driver installation will start.
Please wait until the installation of the drivers is finished and then click Close to
finish the installation wizard.