Corinex Global ADSL2+ User Manual
Page 55
4.4.2 UPnP
UPnP (Universal Plug and Play), NAT (Network Address Translation) and
Firewall Traversal allow traffic to pass through the Gateway for applications using
the UPnP protocol. UPnP can be enabled/disabled across Multiple LAN
segments. This feature requires one active DSL connection. In presence of
multiple DSL connections, select the one over which the incoming traffic will be
present, for example the default Internet connection.
54
Corinex ADSL+ Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
Follow the steps below to enable UPnP.
1. Check Enable UPnP. This enables the WAN Connection and LAN Connection
fields.
2. Select
the
WAN Connection and LAN Connection from the drop-down lists.
3. Click
Apply.
4.4.3
SNTP
SNTP (Simple Network Timing Protocol) is a protocol used to synchronize the system
time to the public SNTP servers. It uses the UDP protocol on port 123 to communicate
between clients and servers. The following picture shows the default SNTP screen.