Corinex Global ADSL2+ - Manual (Page 94)

93
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
WPA Mode Description
WPA A Radius server is used for authentication. Please enter the IP
Address of the Radius server, its port (1812 by default) and the
secret.
WPA PSK This mode doesn’t require 802.1x authentication. The authentication
in this mode is based on shared secrets, stored both on the access
point and on the wireless client. Please enter the shared secret
in the String field. The shared secret can be up to 63 characters
long.
After the configuration, click Apply. To enable the new settings you will have to
restart the access point. Please go to the System Commands section in the Tools
tab as shown below and click on Restart Access Point.
4.5.4 Management
The Wireless Management allows you to set up access rights for wireless clients.
You can set up a list of allowed or banned wireless clients, view the associated
clients, or set up multiple SSID for your access point.
After clicking on Management in the left menu, the following page will appear.