Echelon i.LON 100 e2 Internet Server - Manual (Page 44)

4-2 Configuring the i.LON 100
Configuring the i.LON 100
Once you have connected your i.LON 100 as described in Chapter 3, configure it
as described in the following steps:
1. Launch Internet Explorer 6 or later and point to http://192.168.1.222.
The i.LON 100 Internet Server Welcome Web page appears. Click Login.
2. You will be prompted for a user name and password. By default, this is
ilon/ilon. Once you supply this, the main menu Web page opens, as shown
in the following figure:
3. Hover your mouse cursor over Network and then select LAN/WAN from the
dropdown menu.
4. On the LAN/WAN Web page, set up connections, servers, and services, as
described in Setting Up Connections, Servers, and Services Using the
LAN/WAN Web Page, below.
5. If your i.LON 100 server is equipped with a modem, hover your mouse cursor
over Setup, select Modem from the dropdown menu, and then enter the
Modem parameters as described in Verifying i.LON 100 Connections
The i.LON 100 Internet Server includes a Verify web page that is used to verify
communications between the i.LON and LNS Servers, SMTP Servers, ISPs, other
i.LON 100 devices, and third party Web servers. To open this page, hover your
mouse cursor over Setup in the menu bar and select Verify from the dropdown
menu. This page appears as shown in the following figure: