Echelon i.LON 100 e2 Internet Server - Manual (Page 90)

A-6 The i.LON 100 Console Application
[dmn]sn nd the application specified by idx. Caution! This
command is provided for backward compatibility to
add an i.LON 100 server to a pre-installed network.
Echelon does not recommend or support using
this command. The i.LON 100 server should be
installed using a standard network installation tool
such as the LonMaker tool.
ipaddress address Modifies the IP address. For example, ipaddress
101.253.100. This command is valid only when
DHCP is turned off.
listapp Lists the current application instances.
ltipport Reserved for future use.
mkdir directory Makes a directory.
ping hostaddr Tests communications to another IP host.
reboot Reboots the i.LON 100 server. If the i.LON 100
server is currently being used as an RNI, the
networks for which it is acting as an interface must
be closed and opened.
removeapp
index|name
Deletes an existing application instance, specified by
index or name. The user does generally not use this
command.
rename file1 file2 Renames file1 to file2.
servicepin index Sends a service pin message for the application
specified by index. See activateapp for supported
indexes.
show [all|
hwInfo]
This displays configuration information about the
i.LON 100 server. For example, show might display:
Software Version:
2.00-0024
IP Address: 10.1.253.201
Subnet Mask: 255.0.0.0
Host Name: echeloni100
Gateway: 0.0.0.0
SNTP Server: 0.0.0.0
DHCP: off
MAC Address: 00-D0-71-00-4A-04
Time: MON SEP 13
08:30:02 2001
UTC Time: MON SEP 13
06:30:02 2001
Startup script:
/root/config/startup.scr
Timezone:
MET:60:1:5.1.3.2:5.1.10.4
Show all displays all parameters. Show hwinfo
displays hardware properties.
shutdown Properly quits all applications on the i.LON 100
device. A reboot is required to restore operation of all