Echelon i.LON 100 e2 Internet Server - Manual (Page 59)

i.LON 100 Internet Server User’s Guide 4-17
Password For Incoming
Calls/Re-enter Password
Field Length: Up to 30 characters.
The password for incoming calls. This password
must be provided by the caller when attempting
to connect to the i.LON 100 server via modem.
The password will appear as asterisks when
entered. You must reenter the password to
assure that you typed it correctly. By default, the
password name is ilon.
Set the Advanced checkbox to view the following additional properties:
Local IP Address For
Incoming Calls
Set the IP address that will be assigned to
incoming calls by the i.LON 100 server. By
default, this is 198.162.2.2.
PPP Authentication Specify what sort of PPP authentication will be
used. Options are PAP, CHAP, and None.
Modem Country/Region Select the country in which the i.LON 100 server
is located. The i.LON 100 must be rebooted for
changes to this value to take effect. This option is
only available if Modem is set to Internal
Analog.
Tone
Pulse
This option appears only if Modem is set to
Internal Analog.
Select Tone or Pulse to determine whether the
i.LON 100 server Internet Server’s modem will
dial using touch-tone or pulse dialing. By default,
this is Tone.
Dialing Prefix This option appears only if Modem is set to
Internal Analog.
Legal Characters: Digits only
Field Length: 30 characters
If the i.LON 100 server is connected to a phone
system that requires a code to be dialed to reach
an outside line, enter the code here. By default,
these fields are blank.
Delay After Prefix This option appears only if Modem is set to
Internal Analog.
Legal Characters: Floating point number
greater than or equal to 0 and an increment of .1.
If the Dialing Prefix field contains a prefix,
enter the delay, in seconds, between the prefix
being dialed and the phone number being dialed.
The i.LON 100 must rebooted for changes to this
value to take effect. By default, this value is 0.0.