Echelon i.LON 100 e2 Internet Server User Manual
Page 81
i.LON 100 Internet Server User’s Guide
7-5
Description
Comments: Optional field. Generally used to describe
the site.
6. When you have configured the fields on the General tab, click the
Address/Port tab. This opens the tab shown in the following figure:
7. Configure the fields on the Address/Port tab. The following table describes
these fields.
Field Description
i.Lon is
listening on
port:
Default Value: 1628
Range: 1-65,535
Comments: Enter the TCP port number the i.LON 100
server is using to listen for incoming connections from the
LNS Server. This should be set to the same value as the
Incoming RNI Port field in the L
ON
W
ORKS
configuration Web page (see Configuring L
Use Static IP
Address
Comments: Click the Use Static IP Address button to
manually enter the IP address of the i.LON 100 server.
You must enter an IP address in the form x.x.x.x, where x
is an integer in the range 0-255.
You should use this option if your i.LON 100 server’s
hostname is not configured in any name servers (e.g. DNS
servers, HOSTS file).
Use
Hostname
Comments: Click the Use Hostname button to have
xDriver resolve the i.LON 100 server’s IP address from
the hostname and DNS suffix entered in the General
tab.