Pilz PSSu E S RS232-T - Manual (Page 29)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-3
6.1 General wiring guidelines
6 Wiring
 On base modules with screw terminals:
– If you use a multi-strand cable to connect the I/Os, it is recom-
mended that you use ferrules conforming to Parts 1 and 2 of
DIN 46228, 0.14 ... 1.5 mm
2
, Form A or C, although this is not es-
sential. To crimp the ferrules you can use crimp pliers (crimp form
A or C) conforming to EN 60947-1, such as the PZ 1.5 or PZ 6.5
from Weidmüller, for example.
– Maximum torque setting: 0.8 Nm
 Use copper wiring.