Dan Dugan Sound Design E-2 - Manual (Page 58)

Dugan Model E-2 User Guide
58
Figure 6-1 Dugan Utility
If you do not see the Dugan unit(s) on your network in the list, see Establishing
Network Connections
on page 25 .
5. Select the unit to update from the list.
6. Make sure Use DHCP is NOT selected for that unit.
Under certain network conditions, DHCP is not compatible with the firmware up-
date process.
7. Click on Send New Params To Unit.
8. Click Update Firmware.
The unit reboots after the update completes.
9. Repeat steps 5 through 8 for each unit you wish to update.
NOTE: To force an update when the
Update Firmware button is not blue, Ctrl-click the button.
NOTE: If the firmware update process fails, your unit may not pass audio. To recover from this
condition, repeat steps 5 through 8 above, but Ctrl-click the
Update Firmware button.