Dataman 48XP - Manual (Page 58)

58
Error Messages
Could not open file – nnnn!
The file does not exist. You might have typed the wrong filename or
you might be in a different directory.
Verify the filename and the directory, and change to the correct
directory before typing in the filename.
Data file version unmatched!
This message will be displayed if one of the data-files used by the
DATAMAN-48XP software is of the wrong version.
This error occurs if Dataman-48XP.exe is updated, and the data files
are not updated. This might happen if the installation procedure did
not complete.
Re-install the latest release of the DATAMAN-48XP software.
Device Code unmatched!
This error message is returned when the DATAMAN-48XP does a
device ID check.
The device code found on the device is not as expected. You might
have selected an incorrect device as the active device, or the device
is an older/newer version than the device supported by the
DATAMAN-48XP. Disable the ID check in device operation option
can be a temporary solution to the programming the chip if the chip
ID is missing. Select the correct device as the active device.
If the error still occurs, download the latest release of software from
our website. If you are sure that the device you are using uses the
same programming algorithm as a device that is supported, you can
use this device as the active device. You can then disable device
code checking by setting the Operating Options.