KLING & FREITAG K&F SEQUENZA 5 W - Manual (Page 39)

User's manual K&F SEQUENZA 5 incl. accessories
KLING & FREITAG GMBH © 2015 Version 4.1 Page 39 of 88
9.3.6 Mounting SEQUENZA 5 W to SEQUENZA 5 B, Flown
When mounting a SEQUENZA 5 W
speaker with a SEQUENZA 5 B speaker,
you must use the provided connector on
the SEQUENZA 5 W speaker.
Tip
We recommend setting up a triple directly from a vertically standing transport case, as
described in Chapter 'Mounting SEQUENZA 5 W to SEQUENZA 5 W, Flown' on page 40.
If you also disassemble the speakers using a vertically standing transport case, you can be
certain that the speakers are in the transport case the right way for the next assembly.
1. Connect the SEQUENZA 5 W
speaker with a previously
mounted SEQUENZA 5 B
speaker as described in
Chapter 'Safe Connecting
and Disconnecting of the
Products' on page 21.
If you want to setup
complete triples, remove all
lids from the transport cases.
2. Make sure you can see the
red dot on the safety latch.
Remove the ball lock pin
from the SEQUENZA 5 W
speaker and fasten it with
the standard SEQUENZA 5 W
connector.