KLING & FREITAG K&F SEQUENZA 5 W - Manual (Page 56)

User's manual K&F SEQUENZA 5 incl. accessories
KLING & FREITAG GMBH © 2015 Version 4.1 Page 56 of 88
1. Connect a further
SEQUENZA 5 B speaker
with the present speaker
as described in chapter
'Safe Connecting and
Disconnecting of the
Products' on page 21.
Tip
The gliding feet and
guide grooves help to
position the speaker.
2. Please note that you must
use the long leg of the
L-bracket and the outer
drill hole to safely mount
a further SEQUENZA 5 B
speaker.
Make sure you can see the
red dot on the safety latch.
9.5.5 Mounting SEQUENZA 5 W to SEQUENZA 5 B, Stacked
The setup for stacked use only differs from flown use in the alignment of the speakers. Please
note that the speakers must be turned upside down for a stacked setup. In order to avoid
detracting from the speakers' appearance, the logos should be turned by 180° after setup.
1. Connect a SEQUENZA 5 W
speaker with the present
speaker as described in
chapter 'Safe Connecting
and Disconnecting of the
Products' on page 21.
SEQUENZA 5 B