Avery Dennison SNAP 500 - Manual (Page 19)

User’s Manual—SNAP™ 500 Gen 1 and Gen 2 19
2. If the line voltage does not match the voltage for your location, contact your
local AVERY DENNISON supplier.
• In the U.S.A., call (937) 865-2123.
• Outside the U.S.A., please contact your local AVERY DENNISON supplier.
WARNING: Some printers require internal changes when
switching the line (mains) voltage from 115V to 230V.
Refer to Appendix 1 for instructions. Failure to follow the
instructions may result in damage to the printer.
CAUTION: If the number in the window DOES NOT match
the AC power line intended to be supplied to the printer,
DO NOT plug in the power cord.
WARNING: Attempting to open the AC power entry with
the AC power cord already inserted will damage the AC
entry.
Figure 5: Right Side of Printer – Rear View
Blank, No Fusing or
Strapping Required