Contemporary Control Systems Compact Managed Switches Software Manual for Console Access - Manual (Page 74)

TD020850-0MG
74
5.1.3 Managed Objects for Ethernet-like Interface Types — From
RFC 1643
Ethernet-like Interface MIB —‘dot3’ 1.3.6.1.2.1.10.7
5.1.3.1 Ethernet-like Statistics Group — ‘dot3StatsTable’ 1.3.6.1.2.1.10.7.2
oid = “1.3.6.1.2.1.10.7.2.1.1.dot3StatsIndex”
dot3StatsIndex: an index that identifies an interface, same value as ifIndex.
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.2.dot3StatsIndex”
dot3StatsAlignmentErrors: the number of frames received on the interface that are not
an integral number of octets in length and do not pass the FCS check. This count is
incremented when the alignmentError status is returned by the MAC service to the LLC.
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.3.dot3StatsIndex”
dot3StatsFCSErrors: the number of frames received on the interface that are not an
integral number of octets in length and do not pass the FCS check. This count is
incremented when the frameCheckError status is returned by the MAC service to the
LLC.
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.4.dot3StatsIndex”
dot3StatsSingleCollisionFrames: the number of successfully transmitted frame on the
interface for which transmission is inhibited by one collision.
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.5.dot3StatsIndex”
dot3StatsMultipleCollisionFrames: the number of successfully transmitted frame on
the interface for which transmission is inhibited by more than one collision.
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.6.dot3StatsIndex”
dot3StatsSQETestErrors: the number of times that the SQE TEST ERROR message is
generated by the PLS sublayer for this interface. Returns 0.
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.7.dot3StatsIndex”
dot3StatsDeferredTransmissions: the number of frames for which the first
transmission attempt on the interface is delayed because the medium is busy.
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.8.dot3StatsIndex”
dot3StatsLateCollisions: the number of times that a collisions is detected on the
interface later than 512 bit-times into the transmission of a packet.
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.9.dot3StatsIndex”
dot3StatsExcessiveCollisions: the number of frames for which transmission on the
interface fails due to excessive collisions.
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.10.dot3StatsIndex”
dot3StatsInternalMacTransmitErrors: the number of frames for which transmission on
the interface fails due to an internal MAC sublayer transmit error.
Access: read-only