K-Patents PR-23 for K-Patents Appendix User Manual
Page 19
Installation of PR-23 Pharma Refractometer
3
© Copyright K-Patents 2013. All rights reserved.
19
3.4 Indicating Transmitter installation for use
in table top
Attaching table top stand PR-7603-SS for Indicating transmitter
Unlock and open the transmitter cabinet door, then unscrew the retaining screw for the keypad
panel and open the panel. The supplied screws (M5x10 A2 DIN 912) for attaching the stand
are inserted from the inside through the top two holes located at the back of the cabinet. These
are aligned and screwed into the threaded attachment points located at the top of the stand.
The enclosure can now be used as a free standing tabletop unit, see Figure 3.2.
1
Figure 3.5 Attaching the laboratory table top stand to the Transmitter for use in the laboratory.