K-Patents PR-23 for K-Patents Appendix - Manual (Page 39)

Onsite Qualification Protocols and Records: Installation Qualification
6
© Copyright K-Patents 2013. All rights reserved.
39
6.8 Electrical connections and wiring
Description of requirements
The frequency of the power supply must match the frequency indicated on the instrument’s
rating plate. The electrical wiring connections have been connected in accordance with
the instructions laid down in the PROCESS REFRACTOMETER PR-23 INSTRUCTION
MANUAL
Section 12.
Requirement acceptance values
All electrical wiring connections have been connected in compliance with the instructions laid
down in the PROCESS REFRACTOMETER PR-23 INSTRUCTION MANUAL
Section 12.
Date Signature Pass
*
Conditional Pass Fail
*Conditional pass:
Description of requirements
Ethernet connections and wiring have been connected and set up in accordance with the
PROCESS REFRACTOMETER PR-23 INSTRUCTION MANUAL
Section 12.
Requirement acceptance values
The Ethernet connections comply with the PROCESS REFRACTOMETER PR-23
INSTRUCTION MANUAL
Section 12.
Date Signature Pass
*
Conditional Pass Fail
*Conditional pass: