Niveo Professional NGS16TP - Manual (Page 118)

114
NIVEO PROFESSIONAL Gigabit Management Switch
User's Manual
This page is used to configure LACP function. With LACP protocol, switches can learn
trunk connections automatically.
Follow the steps to do it. (*Don’t connect trunk cables until this function is set.)
a. Enable Trunk function at “Trunk Information” page first. Then click *Apply+.
b. Assign System Priority. (Its value is 1~65535 and higher number has lower priority.
Combining with the Mac address of the switch, it is used to identify this switch in
LACP protocol operation.)
c. Select ports that will run LACP protocol.
d. Click [Apply].
Note: If ports are already in static trunk group, they are not allowed to apply as LACP
ports. If static ports are selected as LACP ports, warning message will be prompted when
[Apply] is clicked.
3). Lacp Port Status
This is for LACP protocol running status.