Niveo Professional NGS16TP User Manual
Page 9

5
NIVEO PROFESSIONAL Gigabit Management Switch
User's Manual
connections to the mains.
[Attach Rack-Mount Brackets to the Switch]
1. Position a Rack-Mount Bracket on one side of the Switch.
2. Line up the screw holes on the bracket with the screw holes on the side of the switch.
3. Use a screwdriver to install the M3 flat head screws through the mounting bracket
holes into the switch. (There could have two or four screws for one bracket. That
depends on the model that installed.)
4. Repeat Step 1~3 to install another bracket to the switch.
5. Now it is ready to mount to a rack.
[Mount the Switch on a Rack]
1. Position a bracket that is already attached to the switch on one side of the rack.
2. Line up the screw holes on the bracket with the screw holes on the side of the rack.
3. Use a screwdriver to install the rack screws through the mounting bracket holes into
the rack.
4. Repeat Step 1~3 to attach another bracket that is already attached to the switch on
another side of the rack.