Niveo Professional NGS16TP - Manual (Page 27)

23
NIVEO PROFESSIONAL Gigabit Management Switch
User's Manual
storm-control Configures storm control
trunk
Configures trunk function
username Establishes user name authentication
vlan
Switch Virtual LAN interface
----------------------------------------------------------------------------------------------
1 exit command
This command is used to leave current operation mode. Go back to last mode.
2 help command
This command is used to show all the available commands in this mode.
3 history command
This command is used to show the history of entering commands.
4 logout command
This command is used to logout from console interface.
5 quit command
This command is used to quit from console interface. It has the same function as
logout.
6 aaa command
This command is used to set the authentication manner for administrator of the switch
when login by http(s)/telnet for management. It could be authenticated by local switch
or by RADIUS Server.
Here is the command for the setting.
aaa authentication login local command will set the authentication manner for
administrator by local switch when login by http(s)/telnet for management.
aaa authentication login radius command will set the authentication manner for
administrator by RADIUS Server when login by http(s)/telnet for management.
aaa authentication login local radius command will set the authentication manner for
administrator by local switch first when login by http(s)/telnet for management. If
authentication fail, try by RADIUS Server next.
RADIUS Server is set by radius-server command for command line interface or set in
802.1x function for web interface.