RGBLink VSP 3550S User Manual - Manual (Page 70)

5. System Setup and Operations
How to Achieve Split Function
VSP 3550 User Manual 70
3. Turn the knob, user can select the split mode according to actual
need.
4. Push any button of DVI1, DVI2, DVI3, DVI4 and Layer A and B, select
preset output, key blinks, and it is selected and can be edited.
5. Push [SCALE], [CROP], and [POS] button, key lights, user can set the
size and position of output image. (CROP function is not available for
Layer A and B in V1.0)
6. Turn the knob, or push the number button to input the number directly,
user can set the size and position of output image.
7. Push any rest button of DVI1, DVI2, DVI3, DVI4 and Layer A and B,
Select the output image, repeat step 5 and 6 to set.
Note
When VSP 3550 is in split mode, it only split for
Layer A, and is invalid for other layers.