Replacing flash – VXL Instruments Itona TC72yy Series User Manual

Page 12

Advertising
background image

Replacing Flash

8

5

Replacing Flash

To replace Flash:

1. Remove the power adapter and side cover. For more information see Removing the Side

Cover on page 4.

2. Apply isopropyl alcohol on the glue holding the flash, pull the glue out using the nose

pliers.

Figure 7: Removing Glue

3. Gently pull the IDE flash up from the socket, as shown in Figure 8.

Figure 8: IDE Flash

Advertising
This manual is related to the following products: