Thin client bracket, Removing the thin client from the bracket – VXL Instruments Itona TC72yy Series User Manual

Page 7

Advertising
background image

3

Thin Client Bracket

2

Thin Client Bracket

Removing the thin client from the bracket

The procedure to remove the thin client from the bracket is explained in this section.

To remove the thin client from the bracket:

1. Turn off the power to the client.

2. Remove all the cables connected to the client.

3. Unscrew the thumbscrews provided at the bottom of the bracket.

4. Pull the thin client carefully out of the bracket as shown in Figure 2.

Figure 2: Thin Client Bracket

Advertising
This manual is related to the following products: