Watson-Marlow FF20 - Manual (Page 4)

OPERATOR’S MANUAL
Machine Type:
FF20
FF20 OM 1.01 EN.doc Page 4 of 24
2. CAUTION
This manual should be read before using the FlexFeed 20.
Explanations to the pictograms:
"Warning against touching"/"Warning against dangerous part of the machine":
Warning against high voltage:
The mains switch and pneumatic stop button (E in fig. 1) is used for emergency stopping.
The cover (S in Fig. 1) should be mounted when operating the FlexFeed 20.
The FlexFeed 20 should not be connected to power or compressed air supply when it is
installed or adjusted.
The FlexFeed 20 must be placed on a stable bed plate and in such a way, that it is not
exposed to great humidity, high temperatures or other abnormal operating-environments.
It is not to be used in explosion hazardous environments.
It is prohibited to maintain or clean the FlexFeed 20, when it is connected to the power
supply.
It is prohibited for unauthorised personnel to open the cover of the FlexFeed 20's electrical
parts (the control box).
Always remember that the FlexFeed 20 must be earthed by way of the switch.
Handle the filling needles with caution.