Watson-Marlow FF20 - Manual (Page 8)

OPERATOR’S MANUAL
Machine Type:
FF20
FF20 OM 1.01 EN.doc Page 8 of 24
4.3. Electric installation.
Fig. 4
The 12-pin cable marked 4 is connected to FlexFeed 20 Fig.3 (5) and to the control panel
(8) FlexFeed.
The cable marked 2, connects FlexFeed 20 and the MC12 (
external GO ) or PD12I ( external
1 ) in use via the Filler socket (10)
The main cable is connected to the socket (7) and FlexFeed 20 is now ready to be adjusted
to the required bottle.
4.4. Control panel.
1.
Mode, switches between manual and automatic operation.
2.
Release, carries out bottle exchange during manual operation.
3.
Sensor, bottle sensor control lamp.
4.
Off delay, variable timer for bottle exchange delays.
5.
Speed, controls the speed of the rotary table. Total CCW, stop the rotary table.
6.
Power, power control lamp.
During start-up of FlexFeed 20 the mode switch must be in the manual position.