H3C Technologies H3C S10500 Series Switches User Manual

Page 302

Advertising

291

Each ASBR PE and the PE in the same AS can ping each other.

Configure MPLS basic capability and MPLS LDP on the MPLS backbone to establish LDP LSPs

# Configure MPLS basic capability on PE 1 and enable MPLS LDP on the interface connected to ASBR PE

<PE1> system-view

[PE1] mpls lsr-id 1.1.1.9

[PE1] mpls

[PE1-mpls] quit

[PE1] mpls ldp

[PE1-mpls-ldp] quit

[PE1] interface vlan-interface 11

[PE1-Vlan-interface11] mpls

[PE1-Vlan-interface11] mpls ldp

[PE1-Vlan-interface11] quit

# Configure MPLS basic capability on ASBR PE 1 and enable MPLS LDP on the interface connected to PE
1.

<ASBR-PE1> system-view

[ASBR-PE1] mpls lsr-id 2.2.2.9

[ASBR-PE1] mpls

[ASBR-PE1-mpls] quit

[ASBR-PE1] mpls ldp

[ASBR-PE1-mpls-ldp] quit

[ASBR-PE1] interface vlan-interface 11

[ASBR-PE1-Vlan-interface11] mpls

[ASBR-PE1-Vlan-interface11] mpls ldp

[ASBR-PE1-Vlan-interface11] quit

# Configure MPLS basic capability on ASBR PE 2 and enable MPLS LDP on the interface connected to PE
2.

<ASBR-PE2> system-view

[ASBR-PE2] mpls lsr-id 3.3.3.9

[ASBR-PE2] mpls

[ASBR-PE2-mpls] quit

[ASBR-PE2] mpls ldp

[ASBR-PE2-mpls-ldp] quit

[ASBR-PE2] interface vlan-interface 11

[ASBR-PE2-Vlan-interface11] mpls

[ASBR-PE2-Vlan-interface11] mpls ldp

[ASBR-PE2-Vlan-interface11] quit

# Configure MPLS basic capability on PE 2 and enable MPLS LDP on the interface connected to ASBR PE
2.

<PE2> system-view

[PE2] mpls lsr-id 4.4.4.9

[PE2] mpls

[PE2-mpls] quit

[PE2] mpls ldp

[PE2-mpls-ldp] quit

[PE2] interface vlan-interface 11

Advertising