H3C Technologies H3C S10500 Series Switches User Manual

Page 55

Advertising

Interface : NULL0 Cost : 0

The output shows that the MCE has learned the private route of VPN 2. The MCE maintains the routes of

VPN 1 and VPN 2 in two different routing tables. In this way, routes from different VPNs are separated.

Configure routing between the MCE and PE 1.

# On the MCE, configure the port connected to PE 1 as a trunk port, and configure it to permit packets

of VLAN 30 and VLAN 40 to pass with VLAN tags.

[MCE] interface gigabitethernet 1/0/3

[MCE-GigabitEthernet1/0/3] port link-type trunk

[MCE-GigabitEthernet1/0/3] port trunk permit vlan 30 40

[MCE-GigabitEthernet1/0/3] quit

# On PE 1, configure the port connected to MCE as a trunk port, and configure it to permit packets of
VLAN 30 and VLAN 40 to pass with VLAN tags.

[PE1] interface gigabitethernet 1/0/1

[PE1-GigabitEthernet1/0/1] port link-type trunk

[PE1-GigabitEthernet1/0/1] port trunk permit vlan 30 40

[PE1-GigabitEthernet1/0/1] quit

# On the MCE, create VLAN 30 and VLAN-interface 30, bind VLAN-interface 30 with VPN instance
vpn1 and configure an IPv6 address for the VLAN-interface 30.

[MCE] vlan 30

[MCE-vlan30] quit

[MCE] interface vlan-interface 30

[MCE-Vlan-interface30] ip binding vpn-instance vpn1

[MCE-Vlan-interface30] ipv6 address 30::1 64

[MCE-Vlan-interface30] quit

# On the MCE, create VLAN 40 and VLAN-interface 40, bind VLAN-interface 40 with VPN instance
vpn2 and configure an IPv6 address for the VLAN-interface 40.

[MCE] vlan 40

[MCE-vlan40] quit

[MCE] interface vlan-interface 40

[MCE-Vlan-interface40] ip binding vpn-instance vpn2

[MCE-Vlan-interface40] ipv6 address 40::1 64

[MCE-Vlan-interface40] quit

# On PE 1, create VLAN 30 and VLAN-interface 30, bind VLAN-interface 30 with VPN instance vpn1

and configure an IPv6 address for the VLAN-interface 30.

[PE1] vlan 30

[PE1-vlan30] quit

[PE1] interface vlan-interface 30

[PE1-Vlan-interface30] ip binding vpn-instance vpn1

[PE1-Vlan-interface30] ipv6 address 30::2 64

[PE1-Vlan-interface30] quit

# On PE 1, create VLAN 40 and VLAN-interface 40, bind VLAN-interface 40 with VPN instance vpn2
and configure an IPv6 address for the VLAN-interface 40.

[PE1] vlan 40

[PE1-vlan40] quit

[PE1] interface vlan-interface 40

[PE1-Vlan-interface40] ip binding vpn-instance vpn2

Advertising