Grass Valley FT Server - Manual (Page 74)

8. Restart and log in to Windows as Administrator/adminGV!.
9. When prompted, enter Windows operating system product key and activate later.
10. Restart as prompted.
11. Complete items as prompted by the sysprep process, including the following:
• Time zone
• Server name
• Deselect Automatic Updates
• Select Don't show again at startup
The server restarts.
12. If Server Manager opens, select Don't show again at startup .
13. In the top CPU/IO module, insert all drives.
14. In the bottom CPU/IO module, insert all drives.
15. Connect power cabling and start up bottom CPU/IO module.
16. Perform dual disk configuration as follows:
a) In the RDR Utility, create the first Virtual disk.
b) When prompted to reboot, click
No .
c) Manually reboot the system.
Refer to related topics in this document.
17. Perform system disk dual configuration as follows:
a) Right-click on Slot 0 of PCI Module 11 and select Add Physical Disk To RDR Virtual Disk .
Refer to related topics in this document.
18. Set resync priority as follows:
a) Set Virtual Disk 0 to high priority In the Logical disk section, highlight RDR Virtual Disk ,
right-click and select Set Resync Priority , set to High and click OK .
Disk 0 in each chassis blinks rapidly until the initialization is done.
Refer to related topics in this document.
19. Repeat steps to create Virtual Disks and map to physical disks.
20. Wait until Disk 0 completes the build process.
That takes approximately 3 hours.
21. Use Windows utilities and build a Dynamic disk with all other disks, except for drive 0, using
the striped mode rather than the span mode.
Refer to related topics in this document.
22. Set duplex LAN configuration to team the left NICS in each server and the right NICS in each
server.
Refer to related topics in this document.
23. Name teams Control Team and FTP Team .
Refer to related topics in this document.
24. Reorder network adapters so the Control Team is first and the FTP Team is second.
Refer to related topics in this document.
74 FT Server Instruction Manual 20131220
Servicing the FT Server