Grass Valley Kayenne XL Package Installation v.7.0.2 - Manual (Page 106)

106 Kayenne XL Package — Installation and Service Manual
Section 5 — Maintenance
Install a KayenneXL Stand Alone GUI on a Notebook PC
This document describes installation process to attach a Kayenne XL GUI
control panel to a Stand Alone PC (or Notebook).
Hardware Requirements
• Kayenne XL Stand alone GUI Module
• 48V Power supply
• 48V Power supply cable
• USB connection cable (USB-A / USB-B)
• DVI Monitor cable
Windows Drivers
• Touch Screen Driver (Hampshire Rev. 6.20 )
• USB Serial Driver
A self extracting version of the drivers you can get here
\Kayak\KayenneXL Sidepanel Drivers\Kayenne XL PCU Version
\Kayak\KayenneXL Sidepanel Drivers\Stand Alone PC Version
Installation
To install the Windows drivers the administration access right is required.
Cabling
Connect the three cables mentioned above and switch on the Power of the
Stand Alone GUI Power Supply and the PC.