Grass Valley Kayenne XL Package Installation v.7.0.2 - Manual (Page 66)

66 Kayenne XL Package — Installation and Service Manual
Section 3 — Control Surfaces
If a PC is used for Kayenne XL Menu operation, the PC’s IP address must
be set to a compatible value to work with the rest of the Kayenne XL
system.
Menu Panel Cooling
The Kayenne XL Touch Screen Menu Panel is externally powered and does
not have internal cooling fans. The unit is convection cooled throught per-
forations in the rear of the chassis. Mounting the panel in a free-standing
manner with the articulated Arm allows maximum air movement, and is
the preferred installation method. If an alternative method is used, ensure
that all vents are unobstructed and adequate airflow is available. Do not
install the Menu panel into an enclosed space.
CAUTION Do not install the Menu Panel into an enclosed space. Passive air movement
is required for cooling.
Menu Panel Articulated Arm Installation
The Kayenne XL Touch Screen Menu Panel has VESA 75 threads on the
back that can be used to mount the Menu Panel to the supplied articulated
arm, or any VESA compliant mounting system.
Figure 49. Articulated Arm Range of Motion Dimensions
The supplied articulated arm is equipped with a flex-mount system, per-
mitting a variety of mounting options (table-top, wall mount, etc.). See the
documentation provided with the articulated arm for specific installation
instructions.
157 mm
6.18 in.
225.5 mm
8.88 in.
Max
vertical
range
454.7 mm
17.0 in.
Max
horizontal
range
685.8 mm
27.0 in.
114.3 mm
4.5 in.
438.2 mm
17.25 in.
387.4 mm
15.25 in.
195.3 mm
7.69 in.
79.4 mm
3.125 in.
SIDE VIEW
Vertical Range
TOP VIEW
Horizontal Range
TOP VIEW
Arm Folded
8623266_08