Bang & Olufsen BeoSystem 1 - Manual (Page 8)

8
Switch on the TV or Satellite source of
your choice and step through your
channels.
If you watch your programmes via
digital receivers or cable boxes, you
can operate the available channels
and services they may offer via the
Beo4 remote control.
Specific menu overlays* are available
for each of the receivers or boxes
which are registered and compatible
with BeoSystem 1. The menu overlays
show the functions available, as well
as the set of Beo4 buttons that give
you access to those functions.
If you have connected a satelite
receiver, you must register it in the
EXTERNAL SOURCES menu. Please
refer to Register equipment
connected to BeoSystem 1 for
information about registering
connected equipment.
Watch TV or Satellite programmes
Watch TV or SAT channels
Once you have selected your TV source and
specific channel type, you can use Beo4 to
step between the available channels or enter
the channel number. To watch television
channels received via Satellite, press SAT. To
watch a specific Satellite channel, enter the
channel number.
Switch on TV channels
Step through available TV
channels one by one
Switch on Satellite channels, if
these are available in your setup
Use the number keys to select a
specific channel. This applies to
both TV and Satellite channels
Switch the system to standby
TV
TV CABLE
▲
▼
SAT
SAT
0 – 9
•
Selected functions for TV or SAT
Use the Beo4 remote control to operate
selected functions via menu overlays. Each
menu overlay is not explained in detail. The
operations described below apply to all
receivers or cable boxes, but the functions
activated will vary.
Press TV to switch on TV
channels, or…
…press SAT to call up your
Satellite channels
Call up the menu overlay for the
selected source
Press a coloured button on Beo4
to activate a function shown in
the menu overlay
Press the number keys to activate
a numbered function or service
in the menu overlay
In menus or services…
Move the cursor in the desired
direction or to the desired option
Use the number keys to enter
information in menus or services
when relevant
Select an option in a menu
Return to watching television
Switch the system to standby
TV
TV STB
SAT
SAT
MENU
0 – 9
▲
▼
ss tt
0 – 9
GO
EXIT
•
*NOTE! For further information about the menu
overlays available for the different types of boxes,
please refer to the enclosed Product List.