MCZ Tube 2013 - Manual (Page 29)

L
27
6-OPERATION
Technical Dept. - All rights reserved - Reproduction is prohibited
INSERT THE PELLETS
LIFT THE COVER
LOADING THE PELLETS
LOADING THE PELLETS
Fuel is loaded from the upper part of the stove by opening the door. Pour the pellets into the hopper.
This is easier if performed in two steps:
• Pour half the contents into the hopper and wait for the fuel to settle at the bottom.
• Then pour in the second half.
Never remove the protective grille from inside the hopper. When loading pellets, prevent the bag from coming into
contact with hot surfaces.
No other type of fuel other then pellets, in compliance with above-mentioned specifications, is to be inserted into
the hopper.
Store the fuel at a safe distance.
Do not pour the pellets directly on the brazier but only into the hopper.
Most of the surfaces of the stove are very hot (door, handle, glass, smoke outlet pipes, hopper door, etc.). It is
therefore recommended to avoid contact with these parts unless adequate protective clothing is worn.