Emerson MICRO MOTION 1700 - Manual (Page 39)

Bend radii of armored cable Table 4-4:
Jacket material Outside diameter Minimum bend radii
Static (no load) condition Under dynamic load
PVC 0.525 inches (14 mm) 4–1/4 inches (108 mm) 8–1/2 inches (216 mm)
Teflon FEP 0.340 inches (9 mm) 3–1/4 inches (83 mm) 6–3/8 inches (162 mm)
Cable illustrations
Cross-section view of jacketed cable Figure 4-5:
A
C (4)
B (4)
D (5)
A. Outer jacket
B. Drain wire (4 total)
C. Foil shield (4 total)
D. Filler (5 total)
Mounting and sensor wiring for 9-wire remote installations
Installation Manual 35