Installing an interfacecard, Installing an interface card -17 – Epson 5000 User Manual
Page 109
Advertising
Installing an interface card
Follow the steps below to install an optional interface card.
1. Make sure the printer is turned off. Unplug the printer’s
power cord and disconnect the interface cable.
2. Remove the screws from the interface cover. Remove the
interface cover.
3. Be sure to set any switches and jumpers on the card. See the
interface card’s manual for details. Make sure that you set
jumper JG to on, or the card will not work properly.
Using Printer Options
4-17
Advertising
See also other documents in the category Epson Hardware:
- C8230
- 400
- 400
- 600
- 640
- 700
- 850
- 1520
- C82314
- RS-485
- 6200A
- C82307
- UB E02
- 440
- 440
- 660
- 5000
- 9000
- ARM.POWERED ARM720T
- SD-DSPUSBB
- CMD-2260
- C823301
- S1C6200A
- 33+
- FEH300b
- SED 1520 Series
- Serial Interface GQ-3500
- ETX-945
- Photo EX
- C82364
- 214D-1
- EM07ZS1647F
- Connect-It SD-DSWIFIB
- ACTIONPC 7000
- S5U1C63000H2
- C824
- C82069*
- 80211b
- C82312
- S5U1C17801T1100
- C82324*
- C82372
- C82315
- P07303
- C82332
- MultiRIP Ethernet Card
- Past Ethernet Combo Print Server PS-1216U
- S5U1C62000A
- PSB.2003.04.003
- Connect-It SD-DSP7B
- SD-USBA
- C82310
- S1C63558
- C82346
- MF1466-01
- Computer Hardware
- C82605
- S1C62 Family
- BT-0260
- S1C88650
- Connect-It SD-DSETHC
- XDT
- VIGOR 3300
- IWE3200-H
- Bi-directional Parallel Interface Board B80818*
- SED1278F/D
- PC800 EN
- 9000 EN
- 400EN