Epson 5000 User Manual
Page 51
Advertising
![background image](/manuals/86537/51/background.png)
4.
Slide the left sprocket unit to approximately 12 mm (½ inch)
from the far left position and push the sprocket lock lever
back to lock it in place. Then slide the right sprocket unit to
match the width of your paper, but do not lock it. Move the
paper support so it is midway between the sprocket units.
5. Make sure your paper has a clean, straight leading edge.
Then open the sprocket covers and fit the first four holes of
the paper over the sprocket pins.
Paper Handling
2-13
Advertising
See also other documents in the category Epson Hardware:
- C8230
- 400
- 400
- 600
- 640
- 700
- 850
- 1520
- C82314
- RS-485
- 6200A
- C82307
- UB E02
- 440
- 440
- 660
- 5000
- 9000
- ARM.POWERED ARM720T
- SD-DSPUSBB
- CMD-2260
- C823301
- S1C6200A
- 33+
- FEH300b
- SED 1520 Series
- Serial Interface GQ-3500
- ETX-945
- Photo EX
- C82364
- 214D-1
- EM07ZS1647F
- Connect-It SD-DSWIFIB
- ACTIONPC 7000
- S5U1C63000H2
- C824
- C82069*
- 80211b
- C82312
- S5U1C17801T1100
- C82324*
- C82372
- C82315
- P07303
- C82332
- MultiRIP Ethernet Card
- Past Ethernet Combo Print Server PS-1216U
- S5U1C62000A
- PSB.2003.04.003
- Connect-It SD-DSP7B
- SD-USBA
- C82310
- S1C63558
- C82346
- MF1466-01
- Computer Hardware
- C82605
- S1C62 Family
- BT-0260
- S1C88650
- Connect-It SD-DSETHC
- XDT
- VIGOR 3300
- IWE3200-H
- Bi-directional Parallel Interface Board B80818*
- SED1278F/D
- PC800 EN
- 400EN
- 9000 EN